







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Las Vegas Homeowners Choose Toto Construction
Rowan Construction Group North Las Vegas provides independent Toto construction, repair, and installation service across North Las Vegas – for everything from a running Drake to a dead Washlet seat to a full bathroom remodel built around an Ultramax II. We’re not authorized, sponsored, or endorsed by Toto, and we say so plainly, which means we quote the fix that fits the fixture in your house, not the one a brand program prefers. We name the actual failure points, put a written price in front of you before anyone picks up a tool, and back the work with our 365-Day Done Right Promise. Call (844) 708-4417 to book a free estimate.

Why Trust Rowan Construction Group North Las Vegas for Your Toto Construction?

Toto fixtures ask for a level of familiarity that generic handyman work doesn’t supply. Drake and Drake II two-piece toilets, Ultramax II one-pieces, and the Washlet seat line each carry their own fill-valve geometry, tank seam, and control electronics, and our technicians have up to 19 years of experience working on all of them. We know that a Toto fill valve isn’t a universal one, that a Washlet wand descales differently than a standard spray nozzle, and that the wrong flapper will shorten the life of the flush-valve gasket.
Where an OEM part is still supported, we fit genuine Toto components – fill valves, flappers, flush assemblies – because that’s what keeps a fixture working the way it was engineered to. Where a model has been discontinued and a proven equivalent exists, we’ll tell you that before we order anything. We also work warranty-safe: we don’t drill into sealed Washlet housings, cut into a bowl, or swap control boards in a way that gives a manufacturer a reason to walk away from a claim. Every visit comes with a documented photo record of what we found and what we did, so you have evidence in hand whether you’re filing a claim or just comparing quotes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in North Las Vegas
- Washlet control boards and hard-water scale (Washlet, S500e, S7 bidet seats). After years of scale buildup in the spray wand and internal valve, the seat’s control board is often the first thing to fail. Symptoms are a weak or uneven spray, no warm water, or error lights that won’t clear. In North Las Vegas, where tap water runs hard, that scale builds faster than most owners expect.
- Tank-to-bowl leaks and weeping at the flush valve (Drake, Drake II, Ultramax). The usual cause is a rubber flapper and seal degraded by chlorine tablets dropped in the tank. The seam leaks, the toilet runs, and the water bill climbs quietly.
- Proprietary fill and flush valves swapped for universal parts. A previous owner or quick-fix plumber often replaces a Toto fill valve with a universal one, which causes a weak flush or a toilet that runs continuously. EcoPower sensor components on commercial-style residential installs fail the same way.
- G1/G2 glaze wear and hairline cracks (older one-piece bowls). Wear in the glaze and hairline cracks at the outlet or rim turn a simple seal replacement into a bowl replacement – especially on a discontinued model where the bowl is no longer made.
- Improper rough-in and flange height after a remodel. A Toto installed on a flange set too high or too low will rock, leak at the base, or fail to seat its wax ring. This shows up most after a DIY bathroom refresh or a floor tile change.
Toto Parts & Our Repair-vs-Replace Approach

We fit genuine Toto fill valves, flappers, and flush assemblies wherever the model is still supported, and only reach for aftermarket parts when an OEM part is discontinued and a proven equivalent exists. Parts are sourced per job, ordered to match your exact model and series, and we’ll show you the part number on the estimate before we order.
Repair versus replace gets an honest answer, not a sales pitch. A 20-plus-year-old Toto with a cracked bowl or a dead Washlet board that’s out of production is usually a replacement, because chasing discontinued components costs more over time than a new fixture. On a supported Drake or Ultramax, a flapper and fill valve is a straightforward repair. A typical job goes like this: a Drake or Ultramax starts running at the tank seam or won’t refill cleanly, the cause is a chlorine-degraded flapper plus a universal fill valve from an earlier fix, and the right move is swapping in the correct Toto fill and flush assembly – unless the bowl shows a hairline crack, in which case a new fixture is the cheaper long-run answer. Call (844) 708-4417 for a free estimate on yours.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the tank and check the flush-valve gasket and bowl inlet for scale or hairline cracks, or, on a Washlet, descale the wand and test the control board and heater circuit. You get the finding in plain terms, with photos.
- 2
Written price. Before any work starts, you receive a flat written price and scope – part numbers, labor, and warranty included. No change proceeds without a signed change order.
- 3
Repair or install. We fit the correct Toto fill and flush assembly, replace the Washlet seat, or set a new fixture on a properly sized flange and wax ring. Nothing is forced to fit.
- 4
Test. We cycle the flush, verify the fill level and shutoff, run the Washlet through its spray and heat functions, and check for leaks at the base and tank seam.
- 5
Warranty and record. You leave with a written warranty and the documented photo record of the visit, under our 365-Day Done Right Promise.
One safety note: the tank and supply line are pressurized and the bowl is ceramic, so a cracked bowl or a valve that won’t shut off is a job for a trained professional, not a DIY removal. We handle it safely.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in North Las Vegas
We work on the Toto line owners actually have in their homes: Drake and Drake II two-piece and one-piece toilets, Ultramax II one-piece toilets, the Washlet and S500e/S7 bidet seats, and EcoPower sensor and flush-valve trim on commercial-style residential installs. Beyond the toilet itself, Toto work often lands inside a broader bathroom project – a bathroom remodeling job where the fixture is the centerpiece, a small bathroom remodel where space and rough-in have to be planned carefully, or a walk-in shower installation where the old tub comes out and the plumbing gets repositioned. We also handle tub-to-shower conversions and bathroom vanity installations around the Toto fixture.
We Also Service These Brands
Toto is one line among many we work with, so you’re not dependent on a single-brand shop. We also service KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows and doors, which matters when a bathroom remodel pulls in a vanity, a shower surround, or a window all at once. One written quote can cover the whole room.

FAQs – Toto Construction Service in North Las Vegas

Is Rowan Construction Group North Las Vegas authorized by Toto? No. We’re an independent Toto service provider, not authorized, sponsored, or endorsed by Toto. That independence lets us recommend the fix that fits your fixture rather than a brand-approved program.
Can you get genuine Toto parts for a Drake or Ultramax in North Las Vegas? Yes, for supported models we order genuine Toto fill valves, flappers, and flush assemblies to match your exact model and series, and we show the part number on the written estimate before ordering.
My Toto Washlet stopped heating water and the spray is weak – repair or replace? It’s usually the control board or internal valve failing after hard-water scale buildup in North Las Vegas, and the honest call depends on whether replacement parts are still available for your seat model. We test the board, descale the wand, and tell you which costs less over the long run. Call (844) 708-4417 for an exact quote – estimates are free.
Does a Toto toilet need a special rough-in or flange during a bathroom remodel? It needs a correctly sized flange at the right height and a proper wax ring; when a remodel changes the floor, we set the flange to match the finished floor so the Toto seats squarely and doesn’t rock or leak at the base.
Is my old Toto covered under warranty if you work on it? Manufacturer warranty coverage is Toto’s call on your specific fixture, and we work warranty-safe so a repair doesn’t create a reason for a claim to be denied. We’re up front that we can’t guarantee a third-party warranty outcome. Call (844) 708-4417 and we’ll talk through your fixture before anyone touches it.
How long does Toto service take? A flapper and fill-valve swap or a Washlet seat replacement is typically a single-visit job, while a cracked bowl or a rough-in correction takes longer once we confirm parts. We put the scope and timing in the written quote so you know before the crew arrives.
Toilet and fixture service is quoted line by line, and these are the ranges for the bathroom work that most often surrounds a Toto. Call (844) 708-4417 for an exact quote – estimates are free.
| Service | Typical Range in North Las Vegas |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Book Your Toto Service in North Las Vegas, NV
Whether it’s a Drake that runs at the tank seam, a Washlet that quit heating, or a bathroom remodel built around a new Ultramax II, Rowan Construction Group North Las Vegas gives you a written price before work starts and a documented record when the crew leaves. Call (844) 708-4417 for a free estimate, or ask for a free second opinion on a written estimate you already have.
Written by the team at Rowan Construction Group.












