







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling in North Las Vegas: What to Know First
Rowan Construction Group North Las Vegas provides independent Kohler kitchen remodeling in North Las Vegas. We’re a construction contractor, not a Kohler dealer or an authorized service center, and we quote a flat written price before any work starts. Most Kohler kitchen projects here run $14,000 to $45,000 and take three to six weeks depending on cabinet layout, countertop fabrication, and tile scope. Call (844) 708-4417 to schedule your free estimate.

This page is for homeowners who already have Kohler fixtures in the kitchen, or who are specifying Kohler into a remodel, and want the same brand-meets-process discipline they’d expect from any other trade decision. If you’re still weighing brands, we carry KraftMaid, GAF, PGT, and Master Halco too, and we’re glad to compare lines on paper.
Key Takeaways
- Kohler kitchen remodels in North Las Vegas run $14,000 – $45,000 for full scope; small and partial remodels run $9,000 – $20,000.
- We’re an independent Kohler service provider, not affiliated with or authorized by Kohler.
- Every project gets a flat written price, a written scope, and a written warranty before anyone picks up a tool.
- No change proceeds until the change order is signed. That discipline is why projects finish within a few percent of the agreed number.
How Kohler Products Fail – and How We Fix Them
Kohler makes a genuinely good product. The failures we see in North Las Vegas kitchens tend to come from three sources: hard water scale, our desert heat cycling through cabinets and caulk lines, and fixtures installed without the shims or rough-in tolerances the spec sheet asks for. Here’s what we run into, and what we do about it.
- Kohler Simplice and Bellera pull-down faucets: spray head drip. The brush-nickel and matte finishes hide mineral scale well, which is exactly why homeowners miss it. North Las Vegas water runs hard, and the diverter inside the pull-down head clogs with calcium before the cartridge ever fails. Most owners assume the whole faucet is shot. It isn’t; a new spray head assembly (an OEM part, and worth the cost over a clone that won’t match the finish) restores full function for a fraction of a new faucet.
- Kohler Iron/Tones and Riverby cast iron sinks: enamel chipping at the drain flange. These sinks are heavy, and if a previous installer set them without proper bedding compound or clipped the drain flange too tight, the enamel around the drain flakes. We reset the sink using the manufacturer’s bedding spec and replace the drain assembly with an OEM part so the finish doesn’t chip again.
- Kohler undercabinet filtration and beverage faucets: slow flow after two summers. The filter housings and small-diameter supply lines don’t love our water. We test flow at the faucet, confirm whether the cartridge or the filter is the culprit, and replace only what’s actually failing.
- Kohler Purist and Composed faucet handles that loosen or wobble. The set screws work themselves loose over time, and if not re-tightened per spec, the handle can score the escutcheon. A $6 set screw in a $400 faucet. We test-fit and torque to spec every time.
- Cabinet and countertop integration when Kohler fixtures are added to a Kohler-layout kitchen. A lot of North Las Vegas homes have builder-grade cabinets, and when a homeowner adds a Kohler apron-front sink or a Kohler-fitted island, the cabinet base has to be modified to the sink’s rough-in dimensions. We cut only after we’ve measured the actual Kohler spec sheet, not the box label, because the box label gets us in trouble about half the time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kohler Kitchen Remodeling Process
Here’s what a Kohler job looks like from the first call through the walkthrough. The order of operations matters more on a Kohler kitchen than on most; the cabinets, the countertops, and the fixtures have to agree on the same three dimensions or nothing goes together quietly.
- 1
Measure in person, not over the phone. We pull the Kohler spec sheet for every fixture going into the job, then measure the actual cabinet, countertop, and rough-in openings against it. Mismatches get caught here, in writing, before a single cabinet is ordered.
- 2
Quote the flat price. A written scope, a written warranty, and a flat number, line by line: cabinets, countertop fabrication and template, backsplash tile, fixture swap, disposal, haul-away. You see every line before you sign anything.
- 3
Source OEM parts where they matter. On Kohler, that means faucet cartridges, spray head assemblies, drain flanges, and anything visible in a finish. Aftermarket copies save a few dollars and cost you twice on the second failure.
- 4
Build to spec, not to speed. Cabinet boxes set level and shimmed at every point, countertop templated after cabinets are installed (never before), backsplash and caulk lines allowed to cure at the manufacturer’s interval. Our trade vocabulary here is unglamorous: shim, template, cure, torque.
- 5
Test like a homeowner, not a contractor. Every Kohler faucet gets run at both temperatures and checked for spray head function. Every disposal, every supply line, every drain gets checked. If a valve drips, we find it before you do.
- 6
Walk the job and hand you the record. A documented photo record of what we found and what we did, a signed final invoice, and the written warranty. The records are yours.
See the difference
Before
After
Before
After
Before
AfterWhat Kohler Kitchen Remodeling Costs in North Las Vegas
Kohler fixtures sit at a higher price point than builder-grade, and the remodel price should reflect that honestly rather than inflating around it. Here are the ranges we quote in North Las Vegas, with Kohler fixtures involved. Every range is a flat price from a written scope; the only thing that moves it is a signed change order.
- Full kitchen remodel, Kohler fixtures throughout: $14,000 – $45,000
- Small or partial kitchen remodel: $9,000 – $20,000
- Cabinet installation (KraftMaid or Kohler-compatible): $4,000 – $13,000
- Countertop installation (template, fabricate, install): $2,000 – $6,500
- Backsplash tile installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
The bigger numbers in each range usually come from layout changes: moving a sink wall, adding an island with plumbing, or replacing cabinets down to the studs. Faucet and sink swaps alone sit near the bottom. We’ll quote the exact number for your kitchen in writing, before work starts. Call (844) 708-4417 for an exact quote; estimates are free, and we’ll give you a second opinion on any competitor’s written estimate at no charge.

Why North Las Vegas Homeowners Call Rowan Construction Group North Las Vegas for Kohler Work
We’ve been building since 2007, and every job comes with the same standing offers. The 365-Day Done Right Promise means if it isn’t right, we come back and make it right. The written price comes before any work starts, every time. The photo record on every visit is standard, not an upgrade. Calls are answered by a live person 24/7, and every crew member who shows up at your door is background-checked and uniformed. Our technicians have up to 19 years of experience, including on Kohler-specific installs and repairs.
On the sourcing side, we stock depth across 50-plus vetted brands. If Kohler isn’t the right answer for a given line item, we’ll say so and quote KraftMaid for cabinets, Cambria or Caesarstone for the countertop, GAF for anything above the ceiling, PGT for windows, Master Halco for fencing. The quote isn’t about brand loyalty; it’s about honest numbers.
FAQs

No. Kohler’s fixture warranty covers the fixture; it doesn’t cover installation or remodel work. Your install and workmanship are covered by our written warranty and the 365-Day Done Right Promise. We also follow Kohler’s install specs carefully so nothing we do voids the fixture warranty itself. Call (844) 708-4417 if you want the warranty terms in writing before you commit.
Yes. Kohler parts for current and recently discontinued lines usually ship within a week, and common parts like cartridges, spray heads, and drain assemblies are often faster. On older or discontinued models we check first and tell you honestly if an OEM part isn’t available, rather than quietly swapping in a non-Kohler part that doesn’t match the finish or the fit.
Repair first, unless the finish is already compromised or you’re changing the aesthetic. A $6 set screw or a $40 cartridge on a $400 Kohler faucet is a real repair, and we’ll tell you when it’s worth it. If you’re replacing cabinets or the sink, though, the faucet swap is nearly free, and that’s the moment to upgrade. Call (844) 708-4417 and we’ll talk through both numbers before you decide.
No. The flat written price is the price. If we discover something in the wall (a surprise drain line, a stud that needs replacing), we stop and quote it in a written change order. No work proceeds on that change until you sign it. That’s the discipline that’s kept projects within a few percent of the agreed cost across thousands of jobs.
Three to six weeks is typical for a full remodel with Kohler fixtures; small or partial remodels usually run 7 to 14 days. Cabinet and countertop lead times drive most of the schedule, and our written scope gives you the date range up front. The written quote will include the milestone sequence so you can plan around it.
Written by the team at Rowan Construction Group North Las Vegas, serving North Las Vegas and nearby areas.












